247 Cherokee Rd Nashville, TN 37205 / 1817

Description: | description: rear addition and screen side porch.| | roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | |approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Description: Description: rear addition and screen side porch. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the pr